Intake

HKS Intercooler Kits are application specific upgrade kits for factory intercooled turbocharged vehicles. Designed specifically for each application; intercooler width, height, thickness and placement are calculated for maximum efficiency and performance. All necessary silicone hoses, brackets, hardware and fittings are included for a complete bolt-on installation. Most application specific HKS Intercooler systems and upgrade kits are CARB exempt (CARB E.O. #D-186-21). HKS S-Type Intercooler Kits HKS S-Type intercooler kits are front mount units utilizing either a 600mm X 301mm X 65mm core or a 600mm X 244mm X 65mm core. The larger core is efficient up to 450HP and the smaller core to 400HP. All S-Types utilize a multiple loop shape on the outer fins and a straight through design on the inner fins; allowing the pressurized air to quickly pass through. Notes: Only for manual transmission models 2.0T model only Part# 13001-KB001 Learn More

The HKS redesigned Super Sequential Blow-Off Valve III (SSQV3) for the 2010 Hyundai Genesis Coupe Turbo is a high performance dual stage pull-type blow-off/bypass valve capable on any turbocharged performance level, from bone stock to fully track prepped. Unlike typical push type blow-off valves, the SSQV3 can not leak under any level of boost as it is designed to keep the valve closed against its seat when under boost. Many similar valves use a push-type valve design with a large valve to accommodate high boost and high horsepower applications. These large valves react slowly and require high pressure to open, and are not able to activate and prevent compressor surge at light-load conditions. On the other hand, smaller, fast reacting push-type valves do not discharge the airflow capacity required for high horsepower applications and tend to slowly open and leak as boost pressure overpowers the spring. For maximum performance, the SSQV3 incorporates both a small primary valve for ultra quick activation, and a larger secondary valve for additional discharge capacity. The SSQV3 is engineered to initially open the small primary valve at light throttle and load conditions, then sequentially opens the secondary valve for additional relief capacity under high boost and load conditions. The included triple-fin discharge port design produces a powerful, unique and aggressive blow-off sound. This kit is specifically designed for the Hyundai Genesis Coupe with 2.0L Turbo motor and includes all necessary piping, fittings, and hardware for easy, direct bolt-on installation.. Note: 2.0T model only Includes all necessary piping, fittings, and hardware This kit is application specific, meaning piping was made specifically for the Hyundai Genesis Coupe intake piping. Part# 71007-KB001 Learn More

The Euroexport BPV/BOV conversion kit is a spacer plate that goes between the stock turbo and the stock BPV/BOV diverter valve. Learn More