Competition Clutch steel flywheel for Honda D16 D15 D17. Weight: 12.3lbs. Part #: 2-694D-ST. The reduce mass allows quicker revving capabilities. CCl flywheels are one piece design made from forged 4140 steel. The CCI lightweight flywheel is recommended for street driven cars as it maintains street driveability. Exceeds SFI 1.5
Competition Clutch stage 5 clutch kit for Honda D series with B series transmission. Part #: 8026-1420. The clutch kit comes complete with a performance pressure plate, a 4 puck sprung ceramic disc, release bearing, pilot bearing, and a clutch alignment tool. Each disc features 8 high-coefficient ceramic pads for quick engagement and extreme duty friction. Competition Clutch's specifically designed high torque disc delivers maximum holding capacity without compromise. The four pucks reduce the area of contact with the pressure plate resulting in an increase in pressure per area from the plate on each puck. Therefore increasing the torque capacity and preventing slippage under load. The sprung retainer assembly boasts 6 dual springs and 6 severe duty retainer rivets, ensuring power and reliability, as well as ease of gear transition. Pressure plate load: 1900lbs. Disc size and spline 220 x 1 1/32 x 24T. 300 mile break in is recommended. Rated at 375 torque at the wheels.
Included are pressure plate bolts and ARP 8470 chrome moly flywheel bolts.
Application D16 D15 D17 motor with B18 B16 B20 transmission