This kit is applicable for Honda S2000 from year 2000 up to 2009.
The kit includes:
- flywheel (2-669-ST)
- 4 puck rigid ceramic disc (99661-0420)
- performance pressure plate (3-669)
- release bearing
- pilot bearing
- alignment tool
- FREE flywheel and pressure plate bolts only as long as they are available/in stock
Competition Clutch flywheels are made of 4140 forged steel and are a one-piece design. This helps significantly in reducing the chances of ring gear separation and friction surface warpage. All flywheels can be resurfaced. Flywheel weights vary from 8lbs to 18lbs depending on application. Meets and exceeds SFI 1.5
The lightweight steel flywheel (ST suffix) is recommended for naturally aspirated and/or street driven applications. This flywheel preserves low-end torque and driveability. Well-suited for Gravity, Stage 1 and Stage 2 clutch applications. These flywheels will work with ALL performance and stock clutch assemblies.
The four pucks reduce the area of contact with the pressure plate resulting in an increase in pressure per area from the plate on each puck. Therefore increasing the torque capacity and preventing slippage under load. Competition Clutch's specifically designed high torque disc delivers maximum holding capacity without compromise. The unsprung disc is lighter than its sprung counterpart, helping reduce rotational mass in the drive train. The absence of a sprung assembly also provides a harder engagement.