Loading... Please wait...
  • Competition Clutch Flywheel Kit Honda Prelude H22 H23 4 Puck Sprung Stage 5

Competition Clutch Flywheel Kit Honda Prelude H22 H23 4 Puck Sprung Stage 5


Product Description

This kit is applicable for Honda 2.0L, 2.1L Prelude years 1990 and 1991.
The kit includes:
  • flywheel (2-701-ST)
  • 4 puck sprung ceramic disc (99785-1420)
  • performance pressure plate (3-701)
  • release bearing
  • pilot bearing
  • alignment tool
  • FREE flywheel and pressure plate bolts only as long as they are available/in stock
Competition Clutch flywheels are made of 4140 forged steel and are a one-piece design. This helps significantly in reducing the chances of ring gear separation and friction surface warpage. All flywheels can be resurfaced.  Flywheel weights vary from 8lbs to 18lbs depending on application.
The lightweight steel flywheel (ST suffix) is recommended for naturally aspirated and/or street driven applications. This flywheel preserves low-end torque and driveability. Well-suited for Gravity, Stage 1 and Stage 2 clutch applications. These flywheels will work with ALL performance and stock clutch assemblies. 
Each disc features 8 high-coefficient ceramic pads for quick engagement and extreme duty friction. Competition Clutch's specifically designed high torque disc delivers maximum holding capacity without compromise. The four pucks reduce the area of contact with the pressure plate resulting in an increase in pressure per area from the plate on each puck. Therefore increasing the torque capacity and preventing slippage under load. The sprung retainer assembly boasts 6 dual springs and 6 severe duty retainer rivets, ensuring power and reliability, as well as ease of gear transition.